This card is unique and easy to make. I've had so much fun playing with this design and I hope you do too.
Here's the link to the Facebook Live and to the YouTube video. Below you will find photos of the samples that I did and the cutting measurements
Your card base will be 11" x 4 1/4", scored at 5 1/2". I used Basic White for my card base on the card I demonstrated.
After you burnish the score, then you'll need to cut 3 1/4" off the bottom of the front. You'll use this piece to cut your slats from. So set the card base aside and using the piece you cut off the front, cut five 1/2" slats. You'll have 3/4" piece left so you'll need to cut this into two equal pieces..app. 3/8".
For the next step, you'll need a low tack tape or a long post-it. Pull off (or cut) a piece app. 6" long as well as 3 small pieces. Watch the video to see how to place your slats and adhere them to the card front.
You can put anything you want on the front. Quiet Meadow works well, as well as the Cheerful Daisies or any flower! I think you could also put hearts on the lattice and that would look so nice!
You will also need a piece of solid cardstock or patterned paper cut at 3 1/4" x 4 1/4". This piece will adhere to the inside of the card under the trellis portion.
Here are the samples and the card that I demonstrated.
Thank you for visiting my blog. Please click Follow on the left if you haven't already done that!